These are some KiCad designed projects that have been made by users. If you want to be featured along the other showcases on this page please submit a pull request on GitHub if you meet the contributing guidelines for requirements on adding a project!
The CIAA Project is an open hardware and software project started to lever the argentinean industrial environment. The CIAA-NXP was designed to be used for industrial applications, and includes high quality terminals, beside of several protections and safety considerations. It has a 32-bit dual-core processor (ARM Cortex-M4F/M0 @204MHz) with several communication ports, including USB, Ethernet, RS485, RS232, CAN, SPI, I2C, and support for connection of LCD display and GPIO input/output.
The CIAA Project is an open hardware and software project started to lever the argentinean industrial environment. Aimed at small footprint projects and also with PCI Express interface. It has a dual core 32-bit ARM Cortex M4F/M0+ @100 MHz CPU, with USB, PCI Express, UART, SPI, I2C, PWM and GPIOs.
CSEduino is the answer to a very low cost DIY Arduino like board. This version has a 2-layer pcb created with kicad.
The Crazyflie 1.0 is an open flying development platform. It is a versatile platform that includes a powerful Cortex-M4 MCU, 2.4GHz low latency radio and bluetooth low energy. It also has an expansion port which allows to easily add extra hardware.
EITI is an I/O module for a PLC/MODBUS based design. The board measures temperature signals, communicate via a RX or TX 4-20mA current loop signal and communicate with other devices over MODBUS. This allows a PLC to interface with many common analog signals.
12 lead ECG with an ARM Cortex M3, USB and Bluetooth, developed and sold in partnership with Eccosur.
GH60 is a custom programmable mechanical keyboard designed for the geekhack community.
HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
The JEMTech-ILDA-Node is a 16 bit 6 channel DAC for ILDA up to 400kpps.
This Project is a DAC (digital to analog converter) which generates six differential signals based on the ILDA (International Laser Display Association) ISP-DB25 standard. The DAC is contolled via SPI (Serial Peripheral Interface) bus.